When you bake something, does it seem like your oven isn't hot enough? Do your cookies and cakes take longer to bake than usual? If so, there are three things that might be preventing your gas oven from heating up properly. You can investigate these three things to locate the problem, and fixing the problem on your own could help you save some money.
Recalibrate the Thermometer
One of the first things to check with your oven is the temperature. To do this, you will need to purchase an oven thermometer. These are very inexpensive and are available at most hardware stores.
Once you have the oven thermometer, place it in the oven and turn your oven on to 350 degrees. After the oven has had enough time to heat up, check the oven thermometer to see what it says. If it has a reading that is significantly lower than 350 degrees, you could try to fix the problem by recalibrating the thermometer inside your oven.
While this may not be the only problem, it is a good place to start. The easiest way to do this is to refer to the owner's manual that came with the oven. It should give you step-by-step instructions on calibrating the thermometer, and this might fix the problem.
Replace the Igniter
All ovens have igniters, and these are used to cause the fire to start when the oven is turned on. If the igniter is dirty or defective, it might cycle off sooner than it should. Because of this, it causes the gas to stop running and prevents an oven from heating up like it should.
Check the Temperature Sensor
The third likely cause of this problem is your oven's temperature sensor. To check this, test your oven's temperature with the oven thermometer once again. If the temperature is off and you have calibrated the thermostat, it might be time to change the temperature sensor in the device.
This sensor tells your oven when to turn on and shut off, and defective sensors cause ovens to heat too much or not enough.
If you try these three things and are still having problems with your gas oven, contact an appliance repair company. They can troubleshoot the appliance with other techniques, and they will find the problem. Once they locate the problem, they can replace the right parts and your oven should work perfectly after this.Share